Concrete Sealer | View our full range of concrete sealers | PICS UK

Concrete Sealer Range

Our full range of sealers, suitable for any surface or purpose.

Our Sealers

PICS manufacture a wide range of solvent and water based concrete sealing and curing solutions across all sectors. Whether sealing a pattern imprinted concrete driveway or curing a power floated industrial floor, there is a quality sealing solution for your specific application. We provide a next day delivery on concrete sealer around the UK or collection from our depots at Newbury, Sheffield and Manchester, and stockists nationwide. Our heavy duty range of trade products are at the forefront of sealer technology, with quantities available in 5, 25, or 200 litre containers. Try a PICS alternative tomorrow and discover what makes our products the most popular and practical in the UK. Export arrangements can be offered and global distribution partners are always welcome.

Pattern Imprinted Concrete / Decorative Concrete Sealers

High Solid Sealer

A high resin content acrylic sealer used for new pattern imprinted concrete projects, and where a higher sheen is preferred on reseal projects. Available in 25 litre drums, and applied by roller, brush or viton sealed hand pump sprayer units at an average coverage of 2-3 square metres per litre.

Purpose

To impregnate a PICSPAVE slab and combine the benefits of curing, hardening, dust proofing and sealing.

Special properties

  • Hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal (ISS)
  • Non-re-emulsifiable, non-blooming when wet
  • 100% inter-coat adhesion
  • Curing Agent – allows slab moisture emigration prior to reaching full hardness
  • Non-yellowing
  • Anti-carbonising agent
  • Mechanical bond with surface matrix prevents delamination
  • Tough, Durable and Hard Wearing
  • Designed for use with PICSPAVE to bring out and enhance the full depth of colour of the CSH (Colour Surface hardener) and RA (Release Agent).
  • Slip Resistant
  • Petrol, Diesel, Oil & Grease resistant

Application instructions

The slab must be fully surface dry after washing off (Protimeter 4.5 and below) and all traces of RA (Release Agent) removed by pressure washing and RAW (Release Agent Wash).

Brush slab to remove any dirt or debris.

Control joints must be cut prior to HSS application. HSS must be spray applied using a pressure spray unit equipped with Viton™ seals and solvent resistant hose and body. Apply in two equal applications, keeping sprayer head moving to avoid pooling. The first aapplication must be brushed into the surface and allowed to dry past tacky prior to applying the second coat.

Avoid application in strong, direct sunlight – do not apply if rain is likely within 3 hours of application.

Approximate coverage

4 to 6m2 per litre per application – two applications required.

Low Solid Sealer

A low resin content acrylic sealer used for resealing existing sealed pattern imprinted concrete or where a low sheen is preferred. Available in 25 litre drums, and applied by roller, brush or viton sealed hand pump sprayer units at an average coverage of 2-3 square metres per litre.

Purpose

To impregnate a PICSPAVE slab and combine the benefits of curing, hardening, dust proofing and sealing.

Special properties

  • Hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal (ISS)
  • Non-re-emulsifiable, non-blooming when wet
  • 100% inter-coat adhesion
  • Curing Agent – allows slab moisture emigration prior to reaching full hardness
  • Non-yellowing
  • Anti-carbonising agent
  • Mechanical bond with surface matrix prevents delamination
  • Tough, Durable and Hard Wearing
  • Designed for use with PICSPAVE to bring out and enhance the full depth of colour of the CSH (Colour Surface hardener) and RA (Release Agent).
  • Slip Resistant
  • Petrol, Diesel, Oil & Grease resistant

Application instructions

The slab must be fully surface dry after washing off (Protimeter 4.5 and below) and all traces of RA (Release Agent) removed by pressure washing and RAW (Release Agent Wash).

Brush slab to remove any dirt or debris.

Control joints must be cut prior to LSS application. LSS must be spray applied using a pressure spray unit equipped with Viton™ seals and solvent resistant hose and body. Apply in two equal applications, keeping sprayer head moving to avoid pooling. The first aapplication must be brushed into the surface and allowed to dry past tacky prior to applying the second coat.

Avoid application in strong, direct sunlight – do not apply if rain is likely within 3 hours of application.

Approximate coverage

4 to 6m2 per litre per application – two applications required.

Xtraseal

A high gloss resin content acrylic sealer used for new pattern imprinted concrete projects where a high gloss finish is required. Available in 25 litre drums and applied by brush, roller or viton sealed hand pump sprayer units at an average coverage of 2-3 square metres per litre.

Special properties

  • Hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal (ISS)
  • Non-re-emulsifiable, non-blooming when wet
  • 100% inter-coat adhesion
  • Curing Agent – allows slab moisture emigration prior to reaching full hardness
  • Non-yellowing
  • Anti-carbonising agent
  • Mechanical bond with surface matrix prevents delamination
  • Tough, Durable and Hard Wearing
  • Designed for use with PICSPAVE to bring out and enhance the full depth of colour of the CSH (Colour Surface hardener) and RA (Release Agent).
  • Slip Resistant
  • Petrol, Diesel, Oil & Grease resistant

Application instructions

The slab must be fully surface dry after washing off (Protimeter 4.5 and below) and all traces of RA (Release Agent) removed by pressure washing and RAW (Release Agent Wash).

Brush slab to remove any dirt or debris.

Control joints must be cut prior to Xtraseal application. Xtraseal must be spray applied using a pressure spray unit equipped with Viton™ seals and solvent resistant hose and body. Apply in two equal applications, keeping sprayer head moving to avoid pooling. The first application must be brushed into the surface and allowed to dry past tacky prior to applying the second coat.

Avoid application in strong, direct sunlight – do not apply if rain is likely within 3 hours of application.

Approximate coverage

4 to 6m2 per litre per application – two applications required.

Xylene

A solvent based cleaning and thinning agent for use with xylene based sealers and viton sealed sprayer equipment. Used as a cleaning liquid for spillages of sealer or to reactivate cured acrylic sealer before reapplying new sealer. Available in 5 litre or 25 litre drums.

Commercial Block Paving Sealers

Permaseal

Permaseal is a Solvent-free, clear, UV light-stable solution designed to penetrate and stabilise the jointing sand of block paving and pre-cast flagstones.

Purpose

Protects jointing sand from erosion thus reducing movement and weed infestation in block paved surfaces.

PERMASEAL joint stabilising solution is the effective way to bind the jointing sand in-situ on all commercial block paving applications.

PERMASEAL Solvent Free is designed to penetrate and bind joints in brick and block paving. The sealer penetrates the jointing sand, stabilising joints and preventing weed infestation, burrowing of insects and wind or rain erosion.

Special Features

  • Low maintenance requirement
  • Minimise the loss of jointing sand
  • Protects block surface against contaminants
  • Remains flexible in joints
  • Increases wear resistance of blocks
  • Resists high winds and assists with cleaning
  • Enhances block appearance
  • Proven concept worldwide
  • Increases block stability
  • Long-term benefits to block paving performance

PERMASEAL has elastomeric properties which ensures that joints remain flexible and also allows for the easy removal of blocks and access to the substrate without expensive remedial action.

Typical Applications

  • Supermarket Car Parks
  • Petrol Station Forecourts
  • HGV Loading Areas
  • Estate Roads
  • Airport Runways & Taxi-ways

For particularly demanding applications we recommend PERMASEAL P.U. It incorporates an aliphatic urethane pre-polymer resin, which provides high chemical resistance and flexability.

PERMASEAL is manufactured to BS EN ISO9002 Quality Standards.

Picseal

PICSEAL block paving sealer has been developed to combat the constant problems of staining and weed growth and to enhance the colour and aesthetic appeal.

New or mature block paving can be transformed with the easy spray application. PICSEAL reacts with the natural pigments in the blocks providing a sealed and easy-to-maintain finish as well as hardening the top layer of jointing sand.

Special Features

  • Enhances natural block paving colours
  • Brings old paving alive
  • Easy to apply by sprayer or roller
  • Adds profit to new or old installations
  • Resists oil and stain penetration
  • Inhibits weed and algae growth
  • BS5750/ISO9000 quality approved material

PICSEAL has elastomeric properties which ensures that joints remain flexible and also allows for the easy removal of blocks and access to the substrate without expensive remedial action.

Typical Applications

  • Driveways
  • Patios
  • Courtyards
  • General paved areas

PICSEAL is manufactured to BS EN ISO9002 Quality Standards.

Polyurethane Sealer

Driveway Refurbishment Sealers

Picseal

PICSEAL block paving sealer has been developed to combat the constant problems of staining and weed growth and to enhance the colour and aesthetic appeal.

New or mature block paving can be transformed with the easy spray application. PICSEAL reacts with the natural pigments in the blocks providing a sealed and easy-to-maintain finish as well as hardening the top layer of jointing sand.

Special Features

  • Enhances natural block paving colours
  • Brings old paving alive
  • Easy to apply by sprayer or roller
  • Adds profit to new or old installations
  • Resists oil and stain penetration
  • Inhibits weed and algae growth
  • BS5750/ISO9000 quality approved material

PICSEAL has elastomeric properties which ensures that joints remain flexible and also allows for the easy removal of blocks and access to the substrate without expensive remedial action.

Typical Applications

  • Driveways
  • Patios
  • Courtyards
  • General paved areas

PICSEAL is manufactured to BS EN ISO9002 Quality Standards.

Low Solid Sealer

A low resin content acrylic sealer used for resealing existing sealed pattern imprinted concrete or where a low sheen is preferred. Available in 25 litre drums, and applied by roller, brush or viton sealed hand pump sprayer units at an average coverage of 2-3 square metres per litre.

Purpose

To impregnate a PICSPAVE slab and combine the benefits of curing, hardening, dust proofing and sealing.

Special properties

  • Hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal (ISS)
  • Non-re-emulsifiable, non-blooming when wet
  • 100% inter-coat adhesion
  • Curing Agent – allows slab moisture emigration prior to reaching full hardness
  • Non-yellowing
  • Anti-carbonising agent
  • Mechanical bond with surface matrix prevents delamination
  • Tough, Durable and Hard Wearing
  • Designed for use with PICSPAVE to bring out and enhance the full depth of colour of the CSH (Colour Surface hardener) and RA (Release Agent).
  • Slip Resistant
  • Petrol, Diesel, Oil & Grease resistant

Application instructions

The slab must be fully surface dry after washing off (Protimeter 4.5 and below) and all traces of RA (Release Agent) removed by pressure washing and RAW (Release Agent Wash).

Brush slab to remove any dirt or debris.

Control joints must be cut prior to LSS application. LSS must be spray applied using a pressure spray unit equipped with Viton™ seals and solvent resistant hose and body. Apply in two equal applications, keeping sprayer head moving to avoid pooling. The first aapplication must be brushed into the surface and allowed to dry past tacky prior to applying the second coat.

Avoid application in strong, direct sunlight – do not apply if rain is likely within 3 hours of application.

Approximate coverage

4 to 6m2 per litre per application – two applications required.

Permaseal

Permaseal is a Solvent-free, clear, UV light-stable solution designed to penetrate and stabilise the jointing sand of block paving and pre-cast flagstones.

Purpose

Protects jointing sand from erosion thus reducing movement and weed infestation in block paved surfaces.

PERMASEAL joint stabilising solution is the effective way to bind the jointing sand in-situ on all commercial block paving applications.

PERMASEAL Solvent Free is designed to penetrate and bind joints in brick and block paving. The sealer penetrates the jointing sand, stabilising joints and preventing weed infestation, burrowing of insects and wind or rain erosion.

Special Features

  • Low maintenance requirement
  • Minimise the loss of jointing sand
  • Protects block surface against contaminants
  • Remains flexible in joints
  • Increases wear resistance of blocks
  • Resists high winds and assists with cleaning
  • Enhances block appearance
  • Proven concept worldwide
  • Increases block stability
  • Long-term benefits to block paving performance

PERMASEAL has elastomeric properties which ensures that joints remain flexible and also allows for the easy removal of blocks and access to the substrate without expensive remedial action.

Typical Applications

  • Supermarket Car Parks
  • Petrol Station Forecourts
  • HGV Loading Areas
  • Estate Roads
  • Airport Runways & Taxi-ways

For particularly demanding applications we recommend PERMASEAL P.U. It incorporates an aliphatic urethane pre-polymer resin, which provides high chemical resistance and flexability.

PERMASEAL is manufactured to BS EN ISO9002 Quality Standards.

Industrial Flooring Sealers

Water Based Cure and Seal

Water based Cure & Seal, is a transparent, acrylic polymer resin. It is a hard wearing sealing solution, adding to the abrasion resistance for all forms of freshly laid or cured concrete or screed.

Function

Water based Cure & Seal, is a transparent, acrylic polymer resin. It is a hard wearing sealing solution, adding to the abrasion resistance for all forms of freshly laid or cured concrete or screed.

It is ideal for internal use where solvent fumes are problematic, but is equally effective externally.

Special properties

  • Seals and protects concrete & screed
  • Reduces dusting
  • Packaged in 25 litre plastic containers or 200 litre IBCs
  • Non-yellowing and weather resistant
  • Easy to clean, water based emulsion
  • 75m2 coverage based on two coats

Usage instructions

Can be applied by sprayer, roller or brush, spread evenly and avoiding pooling.

Approximate coverage

An average of 3 square metres per litre should be achieved on freshly placed concrete.

Solvent Based Cure and Seal

A high solids, high performance sealer suitable for heavily trafficked areas.

Function

A high solids, high performance sealer suitable for heavily trafficked areas.

Special properties

Solvent based Cure & Seal is a tough, high viscosity coating with a silk sheen finish. Supplied in 25 litre drums and 200 litre IBCs.

Usage instructions

  • Solvent based acrylic Resin solids content suitable for heavy duty flooring  and adds additional abrasion protection for any concrete surface.
  • Seals and protects concrete and Block Paving
  • Reduces surface dusting
  • Packaged in 25 litre drums
  • Non-yellowing and weather resistant

Approximate coverage

An average coverage rate of 2 square metres per litre for a two coat application.

Hyseal

A water based, transparent, acrylic polymer latex. It is an extremely hard wearing ECO-FRIENDLY sealing solution for all forms of concrete.

Ideal for indoor use when solvent fumes are problematic, but is equally effective outdoors.

Main features:

  • Seals and protects concrete
  • Reduces dusting
  • Packaged in 25litre polythene containers
  • Non-yellowing and weather resistant
  • Easy to clean, environmentally friendly, water based emulsion
  • 80m2 coverage based on two coats

For full details please download our product specification sheet here.

Polyurethane Sealer

Decorative Walling Sealers

Wallseal

Additional information

Product showcase

At PICS we make a commitment to going beyond the supply of materials, and focus on supporting our customers in the development of their business. We take pride in the projects they undertake, which demonstrate what is possible when world leading products are placed in the hands of skilled tradespeople.

Key statistics

Industry Leader

PICS currently supplies over 50% of the colour used in the UK imprinted concrete industry. In 2017 the value of export orders totalled over £500K P/A.

1000+ customers

Every year we supply our PICS manufactured materials to over 1,000 customers across the UK and worldwide, many of which have been customers for over a decade.

20,000 Bags

We understand the immediacy of demand and for that reason we stock over 20,000 bags at anyone time, ensuring our full range is always ready for dispatch.

Contact us

Head Office

Unit 2
Red Shute Hill Industrial Estate
Hermitage, Newbury
Berkshire
RG18 9QL

Online enquiry

Address

Unit 2
Red Shute Hill Industrial Estate
Hermitage
Newbury
Berkshire
RG18 9QL 

 © Pattern Imprinted Concrete Supplies Limited, Unit 2, Red Shute Hill Ind. Estate, Hermitage, Newbury, Berkshire RG18 9QL | Company number 02623534

Terms & Conditions and Privacy Policy